Home > Products
SHK-5-180
idth

Working size width:160 mm

FEATURES

·   Constructed with double saw spindles that are fitted with multiple sawblades. After cutting, the wood material feeds into groove guide to ensure high cutting accuracy.

·   The feed rollers are pneumatic loaded combined with a gear reducer, providing powerful synchronized feeding effect.

·   Multiple upper and lower driver rollers makes feeding system powerful and smoothly.

·   Powered elevation of feed rollers provides convenient and fast adjustment.

·   The table is manufactured from ductile cast iron, vacuum heat-treated, precision ground and hard chrome plated for maximum wear resistance.

·   The saw spindles feature overload protection. In the event an overload occurs, the feed motor stops first then the saw spindle motor stops for safety.

·   Air blast cooling device equipped on the saw spindle eliminates overheating problems for the sawblade.

 

 

A:SAWBLADE COOLING SYSTEM (PATENTED; Optional Equipment)

The air supplied from the air compressor is delivered to the air reservoir. The air cooler cools the air, then the cold air is delivered to the sawblade on the multi-sheet slicer. This sawblade cooling system is applied to reduce the spindle temperature during long time continuous running. It maintains a constant running temperature of sawblade.

 

F: FEED MAGAZINE ( Optional )

This feed magazine enables continuous automatic stock feed that greatly increases working efficiency up to 30%. Stock can be loaded with concave side up or down.

 

 

                    

                   

                   Precision sizing operation

                     Heavy bottom roll drive

 

 

 

SAW BLADE SPECIFICATIONS

SPECIFICATIONS

T.C.T

Body

Concave

Dia.

T

Nole Łp

1.2

---

O

190mm(7 1/2”)

30

50

1.0

---

O

177mm(7”)

20-30

40-50

1.2

---

O

177mm(7”)

20-30

40-50

1.4

---

O

190mm(7 1/2”)

30

50

1.6

---

O

190mm(7 1/2”)

30

50

1.8

---

O

190mm(7 1/2”)

30

50

2.0

1.5

---

200mm(8”)

30

40-50

2.0

1.3

O

200mm(8”)

20-30

40-50

2.0

1.5

---

230mm(9”)

20

40-50

2.2

1.8

---

279mm(11”)

30

40-50

2.3

1.9

---

279mm(11”)

30

40-50

2.4

2.0

---

279mm(11”)

20

40-50

 

SPECIFICATIONS

MODEL

SHK-5-180

Cutting width

160mm

Max. workpiece thickness

126mm

Spindle diameter

40 (50 Opt)

Front bottom spindle motor (B1)

7.5HP

Right vertical spindle motor (R0)

-

Left vertical spindle motor (L0)

-

Front top spindle motor (T1)

-

Rear top spindle motor (T2)

-

Rear bottom spindle motor (B2)

-

Right sawblade spindle motor (R1)

15HP

Left sawblade spindle motor (L1)

15HP

Right sawblade spindle motor (R2)

20HP

Left sawblade spindle motor (L2)

20HP

Right sawblade spindle motor (R3)

-

Left sawblade spindle motor (L3)

-

Feed speed

1.5~18 m/min

Elevating power

1HP

Feeding power

7.5HP

Rev. speed of sawblade

3800-4200 R.P.M.

N.W. / G.W.

4000 / 4200 kgs

Machine size

4000x1900x1520mm

Measurement

4200x2100x1960mm

 

 All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.