Home > Products
23B6
idth

 

 

FEATURES:

·   Minimum working length 235 mm.

·   Standard feed speed - 4~24 M/min.

·   Frequency inverter feed speed 3~36 M/min.

·   Preloaded spindle bearings combined with fine craftsmanship to ensure precision cutting perfomance.

·   Inserted alloy steel tables on front and back of the first spindle are available. Inserted tables are carbonized and hard chrome plated for dependable wear resistance and rigidity for years of smooth operation.

·   Cross and vertical adjustment on each spindle is provided with a mechanical meter.

·   COMPREHENSIVE SAFETY FEATURES:
* Circuit will break if the cutterhead is touched.
* The photocell sensor detects elevation of the entire feeding mechanism.
* The end switch allows for convenient machine running tests.

·   Anti-rust treatment for the machine frame.

·   Tempering treatment for the machine frame assures deformation free after years of operation.

·   Rear bottom horizontal spindle accommodates sawblade.

·   FULLY ENCLOSED SPLASH GUARD:
This carefully designed splash guard cover encloses the complete working area of the machine. It not only provides added safety for the operator, but also keeps noise to a minimum during cutting operations. Once the splash guard is opened, the power shuts off automatically.

 

SPLASH GUARD SUPPORTED SECURELY

The fully enclosed splash guard is supported by Nitrogen cylinders when opened. Also, additional fix plates are employed to tighten the splash guard in place to eliminate the danger of dropping down.

 

2-STEP GEARBOX

Specially designed gearbox features 2-step gear transmission. This effectively reduces gear loading, while ensuring long time gear accuracy and service life.
Universal shafts are manufactured from Chrome Molybedenum alloy steel (SCM440) to resist high torque transmission.

 

UNIVERSAL JOINT FLOATING ROLLERS

The infeed and outfeed end table positions are equipped with floating rollers for greatly inreasing the smoothness of workpiece feed.
5 - spindle moulder is standardly equipped with 2 floating table rollers.
6 - spindle moulder is standardly equipped with 3 floating table rollers.

 

PRESSURE DEVICES FOR UPPER HORIZONTAL SPINDLE

The front and rear pressure devices for upper horizontal spindle are easy to adjust. Mechanical meters on the pressure devices provide accurate reading of adjustment amount.

 

LEFT VERTICAL SPINDLE

The left vertical spindle is equipped with additional side fence to upgrade cutting stability. Integrated pressure roller mechanism permits movement entirely. The right and left spindle accommodates tool length up to 160 mm. with 80 mm. elevation distance.

 

INFEED TABLE

The detachable infeed table reduces packing volume saving freight costs.
The infeed table is manufactured from high quality cast iron(FC30), hardened to HRC 55*C and then hard chrome plated for maximum wear resistance.

 

AUXILIARY PRESSURE ROLLER FOR SHORT STOCK

The right vertical spindle has extra powered pressure roller, maintaining powerful feeding effect during short stock cutting.
Auxiliary feed roller can be lifted for convenient cutter change.

 

FLAT BELT DRIVE

Instead of direct drive, each spindle is driven by a separately mounted motor to eliminate spindle vibration problems. Motor horsepower is transmitted by the high quality flat belf for full power transmission, and long service life.

 

VARIABLE FEED SPEED

The feed mechanism is equipped with a variable speed pulley. device, providing 4-24 M/min variable feed speed change. The makes the machine ideal for cutting various hard and soft wood materials.

 

CENTRAL LUBRICATION FOR SPINDLE

All spindle lubrication is set up in one position for easy greasing.

 

CENTRAL LUBRICATION FOR ALL SLIDEWAYS

All of the slide lubrication is in a central position on one side of the machine. This provides easy maintenance and smooth infeed and rear table elevation mechanism.

 

OPTIONAL:

WIDTH OR DEPTH DIGITAL CONTROLLER (Optional)

Digital control of the cutting width and depth provides added convenience for moulding setup.

 

FREQUENCY INVERTER (Optional)

The workpiece feed is controlled by a frequency inverter, providing variable speed change ranging 3-36 M/min to suit various types of wood material, and for coarse and fine machining the frequency inverter is equipped with a key for safety.

 

UNIVERSAL SPINDLE (Optional)

The universal spindle can be swivelled 270* or operated as a vertical spindle for various angular and complicated moulding operations.

 

FEED MAGAZINE (Optional)

This feed magazine enables continuous antomatic stock feed that greatly increases working efficiency up to 30% stock can be loaded with concave side up or down.

 

AUTO LUBRICATOR (Optional)

An automatic lubricator delivers oil to the infeed table surface and all the slideways, ensuring smooth workpiece infeed at all times.

 

TOP SPINDLE AIR PRESSURE PLATE (Optional)

The air pressure plate for increased performance of cutting stability.

 

ALLOY STEEL INFEED TABLE (Optional)

Eliminating the conventional hard chrome plated table, POM moulders are designed with an inserted table, carbonized and hard chrome treated for dependable maximum.

 

GROOVE TABLE (Optional)

The groove table design for cutting the short, swell and curved lumber, It makes lumber rely on the fence to feeding smoothly and get an accurate planning.

 

 

SPINDLE ARRANGEMENT

 

SPECIFICATIONS

MODEL

23B6

Moulding capacity (mm)

Width

15 ~ 230 mm

Thickness

8 ~ 127 mm

Min. length of workpiece

235 mm

SPINDLE

Spindle speed

6000 rpm

Diameter of spindle

Ø40 mm ( Ø50 mm opt.)

Profile depth max. of vertical spindle adjustment

80mm

Front bottom tool cutting max.

125~155mm

Vertical tool cutting

125~180mm

Top horizontal tool cutting max.

125~180mm

Rear bottom tool cutting & rip saw max.

125~180mm & ripsaw 255mm (Max.)

Feeding rollers diameter

140mm

Feeding speed

4-24m/min, 3-36m/min inverter (optional)

MOTOR

 

Front bottom spindle

7.5HP

Right vertical spindle

7.5HP

Left vertical spindle

7.5HP

Front top spindle

10HP

2nd top spindle

-

Rear top spindle

7.5HP

Rear bottom spindle

10HP

Feeding

5HP

Elevation

1HP

Length of the infeed table

1600 mm , 2000mm (optional)

Net weight / kgs

4800

Gross weight / kgs

5200

Machine size / mm

3886 x 1785 x 1815

Packing size / mm

4100 x 1850 x 2080

 

 All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.