Home > Products
23A4
idth

 

 

FEATURES:

·   Preloaded spindle bearings assembled with fine craftsmanship to ensure precision cutting performance.

·   Inserted alloy steel table is carbonized and hard chrome plated for dependable wear resistance and rigidity for years of operations.(Optional)

·   Additional feed rollers make feeding problem stock easy.

·   A specially designed gear box provides high torque output accurate transmission and a long service life.

·   COMPREHENSIVE SAFETY FEATURES:
* Circuit will break if the cutterhead is touched.
* The photocell sensor detects elevation of the entire feeding mechanism.
* The end switch allows for convenient machine running tests.

·   Anti-rust treatment for the machine frame.

·   Loating table rollers ensure smooth feed of workpiece.

·   Rear bottom horizontal spindle accommodates sawblade.

·   FULLY ENCLOSED SPLASH GUARD
This carefully designed splash guard cover encloses the complete working area of the machine. It not only provides added safety for the operator, but also keeps noise to a minimum during cutting operations. Once the splash guard is opened, the power shuts off automatically.

 

U:FLOATING ROLLERS

The pneumatically controlled universal joint under table creates a floating effect, for outstanding smoothness during stock feed. Choice of 4 or 5 floating rollers.

 

C:INSERTED ALLOY STEEL TABLE

Eliminating the conventional hard chrome plated table, POM moulders are designed with an inserted table, carbonized and hard chrome treated for dependable maximum wear resistance.

 

D:MECHANICAL DIGITAL READOUT

Each spindle is available to be fitted with a mechanical digital readout for accurate spindle setting.

 

M:FRONT AND REAR TABLE FOR HORIZONTAL SPINDLE

The front and rear table for the horizontal spindle is manufactured from high quality alloy steel for high wear resistance.

 

F:FEED MAGAZINE

This feed magazine enables continuous automatic stock feed that greatly increases working efficiency up to 30%. Stock can be loaded with concave side up or down.

 

FULL GROOVE TABLE

Fitted between the 1 st spindle and the initial spindle on the rear bottom spindle set.

 

X:HORIZONTAL SPINDLE SUPPORT (for 30A only)

The top and bottom horizontal spindles on models with 12" width capacity or over, can be fitted with a spindle support. This will ensure a chatter free cutting performance.

 

G:GROOVE TABLE

The groove table is fitted between the 1st and 2nd spindle for feeding warped stocks and preventing kickback.

 

H:UNIVERSAL SPINDLE

The universal spindle can be swivelled 270* or operated as a vertical spindle for various angular and complicated moulding operations.

 

N:NUMERICAL CONTROLLER

Numerical control of the cutting width and depth provides added convenience for moulding setup.

 

I:FREQUENCY INVERTER

The workpiece feed is controlled by a frequency inverter, providing variable speed change ranging 4-36m/min to suit various types of wood material, and for coarse and fine machining. The frequency inverter is equipped with a key for safety.

 

This is the curved rough lumber.

Strong powerful propulsive feeding on curved rough lumber.

It's to trundle out with finishing surface quality.

 

 

SPINDLE ARRANGEMENT

      

 

SPECIFICATIONS

MODEL

23A4

Moulding capacity (mm)

Width

15 ~ 200 mm / 15 ~230 mm

Thickness

8 ~127 mm

Min. length of workpiece

200 mm

Spindle

Spindle speed

6000 rpm

Diameter of spindle

Ø40 mm (Ø 50 mm opt.)

Profile depth Max. of vertical spindle adjustment

35 mm

1st bottom too cutting Max.

125 ~ 155mm

Vertical tool cutting

125 ~180 mm

Upper horizontal tool cutting Max.

125 ~180 mm

Last bottom tool cutting & rip saw Max.

125 ~180 mm & ripsaw 305 mm (Max.)

Feeding rollers diameter

140 mm

Feeding speed m/min

24 m/min (Max.)

MOTOR

1st bottom

7 1/2 HP (10 HP opt.)

Right vertical

7 1/2 HP (10 HP opt.)

Left vertical

7 1/2 HP (10 HP opt.)

Upper horizontal

---

Upper horizontal (2nd)

---

Last bottom

10HP (15HP opt.)

Last bottom rip saw HP (optional)

---

Universal head (optional)

---

Feeding

5HP (7 1/2 HP opt.)

Upper & Lower feeding set

1HP

Net weight (kgs)

3100

Gross weight (kgs)

3700

Machine size (mm)

4500 x 1840 x 1730

Packing size (mm)

4650 x 2020 x 2170

 

 All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.